Met meer dan 100 jaar toegewijd aan technische vooruitgang zijn wij een toonaangevende fabrikant op het gebied van frequentieregelaars, servoaandrijvingen, besturingstechnologie en robotica.
Micro PLC
CPU M13C
Het compacte en snelle besturingssysteem
Yaskawa Nederland Micro PLC CPU M13C
Overzicht
- Aangedreven door SPEED7
- Werkgeheugen [KB]: 128
- Aan boord: 16x DI / 12x DO / 2x AI [stroom 4…20mA of spanning 0…10V] / 4x teller / 2x [PWM / pulstrein]
- Interface [2x RJ45]: actieve Ethernet PG / OP-communicatie met DHCP-ondersteuning, switch, ModbusTCP master / slave, openCommunication, I-Device, PROFINET IO-controller (8 apparaten)
- Optioneel: [2x RS485]: MPI, PROFIBUS-slave, PtP: ASCII, STX / ETX, 3964 (R), USS-master, Modbus-master / slave
- web Server
- SD-kaartsleuf met vergrendeling, tot 8 uitbreidingsmodules, configureerbaar via SPEED7 Studio, SIMATIC Manager en TIA Portal
- Invoer stroomvoorziening
- x Nee
- Input Voltage
- x Nee
- Current Consumption
- x Nee
- Max. current drain at backplane bus
- x Nee
- Max. current drain load supply
- x Nee
- Current consumption from backplane bus
- x Nee
- Current consumption from load voltage L+ (without load)
- x Nee
- Power Loss
- x Nee
- Number of inputs (digital)
- x Nee
- Rated load voltage (digital)
- x Nee
- Current consumption from load voltage L+ (without load)
- x Nee
- Signal logic input (digital)
- x Nee
- Input characteristic curve (digital)
- x Nee
- Initial data size (digital)
- x Nee
- Number of outputs (digital)
- x Nee
- Rated load voltage (digital output)
- x Nee
- Current consumption from load voltage L+ (without load)
- x Nee
- Signal logic output (digital)
- x Nee
- Initial data size (digital)
- x Nee
- Number of inputs (analog)
- x Nee
- Rated load voltage (analog)
- x Nee
- Current consumption from load voltage L+ (without load)
- x Nee
- Voltage inputs (analog)
- x Nee
- Current inputs (analog)
- x Nee
- Resolution in bit
- x Nee
- Measurement principle
- x Nee
- Basic conversion time
- x Nee
- Initial data size
- x Nee
- Number of outputs (analog)
- x Nee
- Output voltage ranges
- x Nee
- Output current ranges
- x Nee
- Resolution in bit (analog)
- x Nee
- Conversion time (analog)
- x Nee
- Output data size (analog)
- x Nee
- Number of counters
- x Nee
- Counter width
- x Nee
- Maximum input frequency
- x Nee
- Maximum count frequency
- x Nee
- Maximum count frequency
- x Nee
- Maximum count frequency
- x Nee
- Maximum count frequency
- x Nee
- Number of channels
- x Nee
- Input voltage (rated value)
- x Nee
- Power stage
- x Nee
- PWM frequency
- x Nee
- Type of encoder
- x Nee
- Encoder frequency
- x Nee
- Encoder resolution (internal)
- x Nee
- Control type
- x Nee
- Terminal voltage max.
- x Nee
- Terminal current max.
- x Nee
- Total current per module, max.
- x Nee
- Number of clamps
- x Nee
- Binding of potential
- x Nee
- Point-to-point protocol
- x Nee
- Encoder Supply: Number of outputs (L+n)
- x Nee
- Rated output current
- x Nee
- Port mode
- x Nee
- Load memory, integrated
- x Nee
- Work memory, integrated
- x Nee
- Work memory, maximal
- x Nee
- Memory card slot
- x Nee
- Racks, max.
- x Nee
- Modules per rack, max.
- x Nee
- Fieldbus
- x Nee
- Connector
- x Nee
- Topology
- x Nee
- Transmission speed, max.
- x Nee
- Address range inputs, max.
- x Nee
- Address range inputs, max.
- x Nee
- Material
- x Nee
- Mounting
- x Nee
- Dimensions Weight
- x Nee
- Dimensions Height
- x Nee
- Dimensions Depth
- x Nee
- Net weight
- x Nee
- Gross weight
- x Nee
- Certifications
- x Nee
- Safety protocol
- x Nee
- Safety requirements
- x Nee
- Circuit monitoring
- x Nee
- Operating temperature Min
- x Nee
- Operating temperature Max
- x Nee
Downloads
| Naam | |||
|
M13-CCF0000 A1 V03 00 04 00
Firmware for PLC System MICRO (CPU M13-CCF0000) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | Engels |
Firmware | Engels | |
|
CPU M13C - M13-CCF0001
Datenblatt für MICRO CPU M13 Data sheet | Duits |
Data sheet | Duits | |
|
CPU M13C - M13-CCF0001
Datasheet for MICRO CPU M13 Data sheet | Engels |
Data sheet | Engels | |
|
CPU M13-CCF0001 - SPEED7 CPU M13C
Rev. 24-04 || MICRO SPEED7 CPU M13C (DI 16xDC24V, DO 12xDC24V 0.5A, AI 2x12Bit U/I) || HW: 01 | CPU-FW: V3.0.13 Technical documentation | Engels |
Technical documentation | Engels | |
|
CPU M13-CCF0001 - SPEED7 CPU M13C
Rev. 24-04 || MICRO SPEED7 CPU M13C (DI 16xDC24V, DO 12xDC24V 0,5A, AI 2x12Bit U/I) || HW: 01 | CPU-FW: V3.0.13 Technical documentation | Duits |
Technical documentation | Duits | |
|
CPU M1x - SPEED7 - Operationsliste
Rev. 24-02 || MICRO Befehlsliste, OBs, SFBs, FBs, SFCs, VIPA spezifische Bausteine, Systemzustandsliste SZL Technical documentation | Duits |
Technical documentation | Duits | |
|
CPU M1x - SPEED7 - Operation list
Rev. 24-02 || MICRO Instructions, OBs, SFBs, FBs, SFCs, VIPA specific blocks, System Status List SSL Technical documentation | Engels |
Technical documentation | Engels | |
|
UK-Declaration of Conformity - MICRO
state: 04.02.2022 Certification | Engels |
Certification | Engels | |
|
EU-Declaration of Conformity - MICRO
state: 04.02.2022 Certification | Engels, Duits |
Certification | Engels, Duits | |
| YASKAWA Controls MTBF Technical documentation | Engels | Technical documentation | Engels | |
|
GSDML File for the MICRO-PLC - I-Device-Function
Configutation file for the I-Device-Function from the MICRO-PLC Settings file | Engels |
Settings file | Engels | |
|
GSDML File for the MICRO-PLC
Configuration file for VIPA MICRO CPU Settings file | Engels |
Settings file | Engels | |
|
M13-CCF0001 A1 V03 00 16 00
Firmware for PLC System MICRO (CPU M13-CCF0001) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | Engels |
Firmware | Engels | |
|
M13-CCF0001 A1 V03 00 13 00
Firmware for PLC System MICRO (CPU M13-CCF0001) Firmware files have the following name structure: Name_ax_Vyyy.zip Name = name/order number of module, e.g. CPU 315-2AG13 ax = hardware version, e.g. a1 for release 1, a2 for release 2 Vyyy ... = firmware version e.g. V3061500 for version 3.6.15 Firmware | Engels |
Firmware | Engels | |
|
3D-Data MICRO CPU
MICRO CPU CAD/CAE | Engels, Duits |
CAD/CAE | Engels, Duits | |
| Yaskawa System Micro | ChinaRoHS Certification | | Certification | ||
|
System MICRO ePLAN Macros
Rev. 17-46 EPLAN | Engels |
EPLAN | Engels |